Anker Innovations R5113 Roav Smart Car Charger F0 User Manual (2023)

Anker Innovations R5113 Roav Smart Car Charger F0 User Manual (1)

Model: R5113

51005000977 V01

Roav Smart Car Charger F0

Owner’s Manual



SAVE THESE INSTRUCTIONS – This manual contains important

safety and operating instructions for the car charger (Model


Please read and understand all instructions before using this

product. If damage is caused by failure to follow the instructions,

the warranty does not apply.

Read all instructions and cautionary markings before using

this product.

Do not expose to rain, moisture, or snow.

Use of an attachment is not recommended or sold by the

manufacturer may result in a risk of fire, electric shock, or

injury to persons.

Do not operate this car charger if it has received a sharp blow,

been dropped, or otherwise damaged in any way; take it to a

qualified service person.

Do not disassemble this car charger; take it to a qualified

service person when service or repair is required. Incorrect

reassembly may result in a risk of electric shock or fire.

To reduce risk of electric shock, unplug this car charger before

attempting any maintenance or cleaning. Turning o controls

will not reduce this risk.

To reduce risk of fire or electric shock, do not interconnect

output terminations.

Avoid long exposure to direct sunlight, which may cause

damage to the device.

Exposing this product to open flames may cause it to explode.

Do not use this product in strong magnetic fields.

Use a dry, soft lint-free cloth to clean. Do not use any

corrosive cleaner or oil to clean.

CAUTION - For continued protection against risk of fire,

replace only with the same type and ratings of fuse, fuse

rating is 32V DC / 5A.

Always obey trac laws and pay attention to the road. Do

not attempt to use this device while driving, as some features

are limited while the vehicle is in motion. Failure to pay full

attention to the operation of your vehicle could result in

death, serious injury or property damage. You assume total

responsibility and risk for using this device.

Consignes de sécurité importantes

(Video) Roav SmartCharge F0 installation and unboxing

CONSERVEZ CES CONSIGNES - Ce manuel contient

d'importantes instructions de sécurité et d'utilisation relatives au

chargeur de voiture modèle R5113.

Veuillez lire et comprendre toutes les instructions avant d'utiliser

ce produit. Si le non-respect des instructions entraîne des

dommages, la garantie ne s'appliquera pas.

Lisez toutes les instructions et les mises en garde avant

d'utiliser ce produit.

Ne pas exposer à la pluie, l'humidité ou la neige.

L'utilisation d'un accessoire non recommandé ou vendu

par le fabricant peut entraîner un risque d'incendie, de choc

électrique ou de blessure.

Ne pas utiliser ce chargeur de voiture s'il a reçu un coup

violent, s'il est tombé ou s'il a été endommagé de quelque

façon que ce soit ; l’apporter à un technicien qualifié.

Ne pas démonter ce chargeur de voiture ; l’apporter à un

technicien qualifié lorsqu’une réparation est nécessaire.

Un réassemblage incorrect peut entraîner un risque

d'électrocution ou d'incendie.

Pour réduire les risques d'électrocution, débrancher le

chargeur de voiture avant d'eectuer toute opération

d'entretien ou de nettoyage. La désactivation des commandes

ne réduit pas ce risque.

Pour réduire les risques d'incendie ou d'électrocution, ne pas

interconnecter les terminaisons de sortie.

Éviter toute exposition prolongée à la lumière directe du soleil,

qui pourrait endommager l'appareil.

L'exposition de ce produit à des flammes nues peut provoquer

son explosion.

Ne pas utiliser ce produit dans des champs magnétiques


Utiliser un chion sec, doux et non pelucheux pour le

nettoyage. Ne pas utiliser de nettoyant corrosif ni d'huile.

ATTENTION - Pour une protection continue contre les risques

d'incendie, ne remplacer le fusible que par un fusible de même

type et de même spécification. Le fusible utilisé est de 32V

DC / 5A.

Keep these instructions.

Do not drop, puncture or disassemble this product.

This product shall not be exposed to dripping or splashing.

Avoid long exposure to direct sunlight, which may cause


Exposing this product to open flames may cause explosion.

Do not use the product in strong magnetic field.

Use clean, soft cloth to clean. Do not use any corrosive

cleaner/oil to clean.

Keep your attention on the road. Do not operate the controls

of this product while driving.

(Video) Installing Bluetooth in my car for $20.00 | Anker ROAV FM Transmitter

1 2 3 4 5



Hands-free call

Streaming music to a car stereo via FM transmission or the

AUX-Out socket

Charging via Two USB charging ports

Anker PowerIQ technology for faster device charging

What’s Included

Owner’s Manual

Roav Smart Car Charger F0


Roav Smart Car

Charger F0

At a Glance

USB charging port Microphone

LED display

LED indicators Status

/ FM frequency flashes


No Bluetooth connection detected

FM frequency is displayed Bluetooth connected

FM frequency flashes

Enter FM mode

Incoming call

In a call in hands-free mode

In a call through smartphone


Multifunction button

AUX-Out socket

/ Car charger adapter

Press and hold for 3 seconds to power on/o.


Anker Innovations R5113 Roav Smart Car Charger F0 User Manual (2)

Roav F0_XXXX

Turn on the FM radio on your car audio deck and tune to

an unoccupied frequency (you should hear white noise).

Press and hold the multifunction button on car charger until

the FM frequency flashes. Press or hold / until the

transmitting frequency matches the frequency your car

stereo is tuned to.


Play Music

When the car charger is successfully connected with your

smartphone, you can play music from your phone. Music

(Video) Anker Roav F2 Pro Review

can then be streamed to your car's audio system via FM

transmitter or Aux-Out socket.

Roav F0_XXXX



Play / Pause Press

Previous / Next track Press /

To further reduce echo and cabin noise on your

calls and

music , you can connect a 3.5 mm AUX cable (not provided) to

the AUX-Out socket of the Roav smart car charger and the AUX-

In socket of your car's audio system.


Make Hands-

Free Calls

When the car charger is successfully connected with your smartphone,

you can enjoy convenient hands-free call.

Answer / End a call Press

Reject a call Press and hold for 1 second

Charge Your


The car charger is equipped with two USB charging

ports. You can charge two devices simultaneously

with a maximum output of 5V/4.8A.


2.4A 2.4A


Specifications are subject to change without notice.

DC input: 12V - 24V

Power output: 5V 4.8A max

Bluetooth: V4.2

Bluetooth transmission distance: 10 m / 393.7 in

FM frequency range: 87.5-108 MHz

FM transmission range: 2 m / 78.7 in

Operating temperature range: -20°C to 40°C / -4°F to 104°F

Storage temperature range: -40°C to 85°C / -40°F to 185°F


FCC Statement

This device complies with Part 15 of the FCC Rules. Operation

is subject to the following two conditions: (1) this device may

not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause

undesired operation.


Changes or modifications not expressly approved by the

party responsible for compliance could void the user's authority to

operate the equipment.

(Video) Anker Roav Smartcharge T2 (F2 Pro now?) vs. F2 Review - Bluetooth Wireless FM Transmitter


This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation.

This equipment generates uses and can radiate radio


energy and, if not installed and used in accordance

with the instructions, may cause harmful interference to


o communications. However, there is no guarantee that

interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference

by one or more of the following measures: (1) Reorient or

relocate the receiving antenna. (2) Increase the separation

8 9 10 117

Get Started

Plug Roav smart car charger F0 into your vehicle’s cigarette

lighter socket.

Start your vehicle’s engine and the LED display will light up.

/ FM frequency will flash alternatively. Once you have

completed step , you should hear a “waiting to pair”

voice prompt.

Enable Bluetooth on your smartphone and search for available

Bluetooth devices. Select “Roav F0_XXXX” and connect.

Once successfully connected, FM frequency will be displayed.

Once you have completed step

, you should hear a

“successfully paired” voice prompt.

12 13 14

between the equipment and receiver. (3) Connect the equipment

into an outlet on a circuit different from that to which the receiver

is connected. (4) Consult the dealer or an experienced radio/TV

technician for help.

FCC Radio Frequency Exposure Statement

The device has been evaluated to meet general RF exposure

requirements. The device can be used in fixed/mobile exposure

condition. The min separation distance is 20cm.



12-month limited warranty

Lifetime technical support

+1(800) 988 7973 (US) Mon-Fri 9:00-17:00 (PT)

@GoRoav @GoRoav


1. Not Good. Anker Roav Bolt Car Charger With Google Assistant Unboxing + Impressions + Installation
(Killer Reviews)
2. Anker Roav SmartCharge T2 Review
3. Alexa for your car 2019! ROAV Viva Pro (by Anker) Work with Amazon Echo & Google / Review+Demo
(Naresh Lal)
4. Anker Roav Smartcharge Bluetooth Wireless FM Transmitter Review
5. How to Change the station on a ROAV SmartCharge F2 Bluetooth FM Transmitter
(My White Whale)
6. Roav F2 Bluetooth Car FM Transmitter by Anker + Gear S3 remote
(My Dope Tech)
Top Articles
Latest Posts
Article information

Author: Merrill Bechtelar CPA

Last Updated: 15/04/2023

Views: 6105

Rating: 5 / 5 (50 voted)

Reviews: 81% of readers found this page helpful

Author information

Name: Merrill Bechtelar CPA

Birthday: 1996-05-19

Address: Apt. 114 873 White Lodge, Libbyfurt, CA 93006

Phone: +5983010455207

Job: Legacy Representative

Hobby: Blacksmithing, Urban exploration, Sudoku, Slacklining, Creative writing, Community, Letterboxing

Introduction: My name is Merrill Bechtelar CPA, I am a clean, agreeable, glorious, magnificent, witty, enchanting, comfortable person who loves writing and wants to share my knowledge and understanding with you.